전처리장치 1 페이지 > 가스분석기전문 에코시스텍

전처리장치

Fittings(PVDF)
  • Part No.05V1060
  • Straight male connector for flexible tube
  • - Male thread connection: G 1/4"
  • - Connection for flexible tube: DN 4/6
  • - Corrosion-resistant
  • - High level of gas tightness
  • - Material of sample-contacting parts: PVDF

  • Part No.: 05V4060
  • - Male elbow connector for flexible tube

  • Part No.: 05V5015
  • - Union tee for flexible tubes

  • Part No.: 05V3215
  • - Straight bulkhead union for flexible tubes
  •  
Gas Conditioning Unit CSS-VC2,…
  • Part No.: 01G6055

  • - Compact high‑performance gas conditioning unit with compressor cooler
  • - With multi-functional temperature control unit (TCU)
  • - Individually configurable and completely pre-installed according to your specifications
  • - Self‑monitoring and low maintenance
  • - Gas flow rate: max. 2 x 150 Nl/h
  • - Dew point stability < ±0.1 °C [±0.18 °F]
  • - Outlet dew point adjustable from +2 to +7 °C [+35.6 to +44.6 °F]
  • - Power: 230 V
  • - Configurable: heat exchangers, sample gas pumps, flow meters, sample gas filters with integrated liquid alarm sensors,
  •   peristaltic pumps and flow alarm sensors with electronic controllers
Gas Conditioning System CSS
  • Part No.: 03G1000

  • - Completely pre‑installed gas conditioning unit suitable for standard applications
  • - Self-monitoring and low maintenance
  • - 1 gas inlet with a max. gas flow of 140 Nl/h
  • - 2 gas outlets including flow meters with a max. gas flow of 70 Nl/h each
  • - Outlet dew point adjustable from +2 to +15 °C [+35.6 to +59 °F]
  • - Dew point stability < ±0.1 °C [±0.18 °F]
  • - Ready for operation in approx. 10 minutes
  • - Power: 230 V
Gas Conditioning System SS-5/3
  • Part No.: 03G5500

  • - Completely pre-installed gas conditioning system mounted on an aluminium plate
  • - With Peltier gas cooler including heat exchanger made of glass, other materials available
  • - Gas flow rate: max. 350 Nl/h
  • - Gas outlet dew point adjustable from +2 to +15 °C [+35.6 to +59 °F]
  • - Dew point stability < ±0.1 °C [±0.18 °F]
  • - Self‑monitoring and low maintenance
  • - Ready for operation in approx. 10 minutes
  • - Power: 230 V
  • - Optionally: flow meter, liquid alarm sensor, 5-way ball valve, temperature controller for heated sample line
Flow Meter FM-40/70
  • Part No.: 09F4000

  • Float-type flow meter for front-panel mounting
  • With fine control needle valve in the gas inlet
  • Measuring range: 7 to 70 Nl/h air
  • With integrated tube connections DN 4/6
  • Compact, flat design
  • Corrosion-resistant
  • Material of sample-contacting parts: glass, PVDF, Viton®
Flow Meter FM-1/100
  • Part No.: 09F1000

  • - Float-type flow meter
  • - Measuring range: 10 to 100 Nl/h air
  • - Sample temperature: max. +80 °C [+176 °F]
  • - Connections: GL 18–6 mm
  • - Corrosion-resistant
  • - For wall mounting in a vertical position
  • - Material of sample-contacting parts: glass, PTFE
Liquid Alarm Sensor LA1S
  • Part No.: 03E1001

  • - Liquid alarm sensor for conductive media
  • - Includes line-break monitoring
  • - Can be integrated in M&C universal filters with GL connection and flow chamber LS
  • - Connection: ø 12 mm
  • - With 4 m electrical connecting cable
  • - Material of sample-contacting parts: glass, platinum
Temperature Controller TRD-H1
  • Part No.: 03B7100

  • - Electronic two-point temperature controller
  • - Suitable for controlling electrically heated sample lines of the series 3/4/5-N/M/H
  • - With 7-pin socket to connect a heated sample line
  • - Connection cable with power plug (Schuko)
  • - Contact rating: 250 V/10 A
  • - Programmable temperature control range: 0 to +390 °C [+32 to +734 °F]
  • - In a wall-mount enclosure
  • - Power: 90–260 V
Bellows Pump MP-F05
  • Part No.: 05P1000

  • - Full PTFE bellows pump
  • - Pump head can be rotated in 90° steps and connected to the gas line from the top or side
  • - Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum and pressure side
  • - Max. operating pressure range: 0.4 to 2.5 bar abs.
  • - Corrosion-resistant
  • - 100 % lubricant-free
  • - High level of gas tightness
  • - Long service life
  • - Power: 230 V
  • - Material of sample-contacting parts: PTFE, PFA, FEP
  • - Optionally: upper part of the pump head out of stainless steel
Calibration gas diluter DLD
  • Dynamic gas diluter DLD2 / DLD3

  • - The gas diluter designed and built by Dado lab
  • - Meet all the calibration and verification needs of automatic gas analyzers 
  • - Suitable for the control and management of both portable and CEMs
  • - Based on the use of high accuracy mass flow controllers
  • - Rugged Pelican-type suitcase
  • - Massflow meter scale ranges : 0.04 / 2L/min
  • - Rangeability : 50 : 1
  • - Accuracy and linearity : ±1%f.s.
  • - Size and Weight : 315 x 280 x 390mm / 6.5kg
Gas Sample Dilution Probe SP20…
  • Part No.: 20S4002

  • - Heated gas sample dilution probe for sampling and dilution of process gas
  • - With a dilution ratio of 30:1 as standard, optionally in the range from 10:1 to 500:1
  • - Dilution gas pre-heater preheats the dilution gas to the sample probe temperature
  • - Dilution unit with critical orifice is located in the heated part of the sample probe
  • - With test gas connection at the sample probe
  • - Based on gas sample probe SP2000H
  • - Filter housing and mounting flange made of stainless steel can be heated up to max. 180 °C [356 °F]
  • - Ceramic filter element with a filter porosity of 2 µm
  • - Including weather protective cover
  • - Easy installation and low maintenance
  • - Low dead volume
  • - Power: 230 V
  • - Material of sample-contacting parts: stainless steel, quartz glass, Viton®, ceramic
  • - Optionally: add-on set A with 1 precision pressure controller and 2 vacuum pressure gauges; 
  •   control panel S with 1 pressure controller and 2 pressure gauges, 1 flow meter and 2 shut-off valves
Dilution Unit DIL-1/H
  • Part No.: 20S4905

  • - Dilution unit electrically heated up to max. +180 °C [+356 °F]
  • - Installed on a mounting plate with thermally insulated cover
  • - Dilution gas pre-heater heats the dilution gas to operating temperature
  •  - With a dilution ratio of 30-40:1 as standard, optionally in the range from 10:1 to 500:1
  •  - 2 internal filters for sample and dilution gas are provided to protect the dilution section
  • - With check valve for test gas
  • - Power: 230 V
  • - Material of sample-contacting parts: stainless steel, quartz glass, Viton®
  • - Optionally: bypass injector DIL-1/B to shorten the response time during vacuum operation; 
  •   second sample gas outlet 2 x AUS for undiluted sample gas; add-on set DIL-1/-A with 1 precision pressure controller
  •   and 2 vacuum pressure gauges; add-on set DIL-1/-A-FM with 2 ball valves, 1 precision pressure controller, 2 vacuum
  •   pressure gauges and 1 flow meter for test gas feeding; control panel DIL-1/-S with 1 pressure controller and 2 pressure
  •   gauges, 1 flow meter and 2 shut-off valves
Front-Panel Mounting Filter FP…
  • Part No.: 04F1005

  • - Flat filter with stainless steel filter element for front-panel mounting
  • - Filter porosity: 3 µm
  • - With filter head made of PTFE
  • - Straightforward filter element change without tools
  • - Low dead volume
  • - For universal use
  • - Female threaded gas connections: G 1/8"
  • - Material of sample-contacting parts: stainless steel, PVDF, PTFE, glass, Viton®
Front-Panel Mounting Filter FP…
  • Part No.: 04F2000

  • - Flat filter with a round ultra-fine glass-fiber filter for front-panel mounting
  • - Filter porosity: 0.3 µm
  • - With liquid alarm sensor
  • - Straightforward filter element change without tools
  • - Low dead volume
  • - For universal use
  • - Female thread connections: G 1/8"
  • - Sample gas and ambient temperature: max. +45 °C [+113 °F]
  • - Material of sample-contacting parts: PVC, acrylic glass, Viton®
Universal Filter FP-2T
  • Part No.: 01F1200

  • - Modular designed filter with filter head made of PVDF
  • - Deep-acting PTFE filter element with a filter porosity of 2 µm
  • - With wall-mounting bracket
  • - Straightforward filter element change without tools
  • - Low dead volume
  • - For universal use
  • - 3 female threaded gas connections: G 1/4"
  • - Sample gas and ambient temperature: max. +80 °C [+176 °F]
  • - Material of sample-contacting parts: PVDF, Viton®, glass, PTFE
  • - Filter element F-2T(Part No.: 90F0002)

      Filter element type F‑2T, length: 75 mm, material: PTFE, filter porosity: 2 µm